Wedge Gate by Ted Sheftic (Launch Gate)

Sale price$349.00 CAD

Fast Worldwide Shipping

Easy 30 Day Returns

Wedge Gate Information

The original name for the product was Wedge Gate, but you might also hear it referred to as the Launch Gate since it can be used to gauge launch angle with other clubs. That said, this trainer is primarily designed for use with wedges. 

The Wedge Gate is a personal golf swing angle trainer designed to give you feedback on your launch angle. If you use it correctly, it will give you information about your impact (shaft lean and face angle) as well as how you launch the ball.

Extensive research by Ted Sheftic and Dr. Rob Neal on pitching has revealed that the BEST players in the world when hitting standard distance and finesse wedges, launch the ball under 30 degrees. These launch wedge trainer conditions allow them to generate high spin and great stopping power. 


There are two basic ways to use the Wedge Gate to get feedback:

  1. Hitting below (or above) the Noodle
  2. Hitting through a window; you can determine if you are launching correctly, too low, or too high. This condition is more advanced than the first one.

To set up the gate for a 30-degree launch, you must go through the following steps

1. Determine the length of shot you are going to hit.

  • If it is less than 40 yards, use a gate of 4 feet. The launch should be between 30 to 34 degrees.
  • In the 40 to 50 Yard distance, use a gate height of 4 or 5 feet.
  • If the shot length is greater than 50 yards we suggest using a gate height of 5 feet.
  • We believe hitting wedges under 3 feet is a great way to practice to launch it under 30 degrees.

2. Use the table below to determine the distance from the gate to where you must hit shots from

3. Hit shots under the noodle for launch angles under 30 degrees, and above for over 30 degrees of launch

Table 1: Distance from gate heights for a 30-degree launch

Gate Height  Distance from gate to impact point
3-feet  62 inches (~ 5-feet)
4-feet 84 inches (~ 7-feet)
5-feet 104 inches (~ 9-feet)


Think about how you will be able to teach your students to compress the ball and improve their IMPACT POSITION. Ted and Rob are very excited about their new Wedge Gate System, and hopefully, you are too!

The videos below are of the original version. The 7-foot high version proved to be too cumbersome to move around with a cart and the extra height was unnecessary for the desired lower launch angles. See the pictures for reference for what the current (2020) version looks like. 


dimensions: 44 x 7 x 6  (13 lbs.)

You may also like
Recently viewed